Description
Schneider SRV2K1-E | APC Easy UPS On-Line, 2000VA/1800W, Tower, 230V, 4x IEC C13 outlets, Intelligent Card Slot, LCD
Description
The APC by Schneider Electric SRV2KI-E is a professional Easy UPS On-Line 2000VA / 1800W uninterruptible power supply designed to provide dependable power protection for servers, networking equipment, telecommunications systems, security installations, workstations, and other business-critical electronic loads.
Using double-conversion online technology, the APC SRV2KI-E continuously conditions incoming utility power and delivers a pure sine wave output. This architecture makes the UPS particularly suitable for sensitive equipment operating in locations where voltage fluctuations, frequency variations, and unstable utility power can affect system reliability.
The APC by Schneider Electric SRV2KI-E provides 2000VA / 1800W rated output power with a nominal output voltage of 230V. Output voltage can also be configured for 220V or 240V, providing flexibility for different single-phase electrical installations.
The UPS features four IEC 60320 C13 output outlets and an IEC 60320 C14 input connection. Its multifunction LCD status and control console provides clear information about UPS operation, alarms, battery status, and system conditions.
The APC SRV2KI-E includes an internal sealed lead-acid battery system consisting of four 12V 9Ah batteries, providing a total battery voltage of 48V DC. Typical backup runtime is approximately 10 minutes at half load and around 3 minutes at full load under specified test conditions.
Intelligent temperature-compensated charging helps support battery service life, while a typical recharge time of approximately four hours allows the batteries to recover to around 90% capacity after discharge. The compatible replacement battery cartridge is APCRBCV204.
For monitoring and management, the APC by Schneider Electric SRV2KI-E includes USB and serial communication interfaces together with an Intelligent Card Slot for optional network management accessories. This allows the UPS to be integrated into professional IT monitoring and infrastructure management environments.
The UPS also features automatic and manual internal bypass functionality, high-efficiency ECO operation, a compact tower design, IP20 protection, and pure sine wave output. With its combination of 2000VA capacity, 1800W active power, internal battery backup, advanced communication, and online topology, the APC SRV2KI-E is a practical power protection solution for essential IT and business systems.
Key Features
The APC by Schneider Electric SRV2KI-E delivers 2000VA / 1800W using double-conversion online UPS technology for continuous protection against unstable electrical conditions.
It provides a pure sine wave output with selectable 220V, 230V, or 240V output voltage and operates from a nominal 230V single-phase supply.
Four IEC C13 output outlets provide connectivity for critical equipment, while the IEC C14 input connection supports straightforward installation.
The internal 48V lead-acid battery system uses four 12V 9Ah batteries and provides approximately 10 minutes of runtime at half load and around 3 minutes at full load under typical conditions.
USB, serial communication, and an Intelligent Card Slot provide flexible options for local and remote UPS monitoring.
Applications
The APC SRV2KI-E is suitable for small servers, workstations, network switches, routers, network storage equipment, telecommunications systems, CCTV and security equipment, healthcare IT, computer rooms, point-of-sale systems, and other sensitive business electronics.
Its double-conversion online architecture makes it particularly suitable for professional environments where equipment requires continuous, stable, and clean electrical power.
